TST‑C1032S Upper Hinge Flip‑Door Slamming Tester
The Upper‑Hinge Flip‑Door Slamming Tester simula ...
The impact height is adjusted by the lead screw and motor. The horizontal position of impact is then adjusted by the gear‑rack in the horizontal direction, and the front‑rear position of impact is adjusted by the gear‑rack in the front‑rear direction.
After the impact position is confirmed, the electromagnet holding the impact head loses power, allowing the impact head to fall freely and strike the soft test pad. Finally, the air cylinder pushes the electromagnet to attract the impact head and reset it to the impact height.
| No. | Test Standard | Detailed Standard & Clause |
|---|---|---|
| 1 | GB/T 24430‑2023 6.4.4 | Bedding Surface Impact Test |
| 2 | GB/T 24430‑2023 6.4.12 | Strength Test for Stair Access Platform |
| 3 | GB/T 41650‑2022 6.6 | Vertical Impact Test |
| 4 | GB/T 10357.1‑2024 6.6 | Table Top Vertical Impact |
| 5 | GB/T 10357.3‑2013 4.12 | Seat Surface Vertical Impact |
| 6 | GB/T 10357.6‑2013 4.6 | Bedding Surface Impact Load Test |
| No. | Item | Specifications |
|---|---|---|
| 1 | Impact Head | 25kg |
| 2 | Crib Impact Head | 10kg |
| 3 | Lifting Motor | 400W Servo Motor |
| 4 | Lifting Speed | 9mm/s |
| 5 | Extension Arm Motor | 400W Servo Motor |
| 6 | Extension Arm Telescopic Speed | 40mm/s |
| 7 | Impact Seat Moving Motor | 400W Servo Motor |
| 8 | Impact Seat Moving Speed | 40mm/s |
| 9 | Bed Surface Height | 400‑2000mm |
| 10 | Bedding Surface Length | 1500‑2000mm |
| 11 | Bedding Surface Width | 800‑1800mm |
| 12 | Clear Height Between Layers | ≥980mm |
| 13 | Mass Error of Impact Head | ±1% |
| 14 | Power Supply | 1‑phase AC 220V 50Hz 6A |
| 15 | Overall Dimension (L×W×H) | 2670×2660×3050mm |
1. After the sample is secured on the device, automatic testing can be performed by inputting sample parameters.
2. The sample can be fixed conveniently. The device is sturdy with low impact noise.
3. The device is equipped with multiple limit protections to prevent damage caused by mis‑operation.
4. Power‑off protection is supported. Current test data is automatically saved upon power failure, and the previous data can be viewed when power is restored next time.
The Upper‑Hinge Flip‑Door Slamming Tester simula ...
The electric folding mechanism testing machine for ...
The automatic comprehensive mattress tester is sui ...
The fabric dynamic fatigue testing machine simula ...
Contact Us
contact usGetintouchwithus
TST
Telephone