TST‑C1032S Upper Hinge Flip‑Door Slamming Tester
The Upper‑Hinge Flip‑Door Slamming Tester simula ...
The impact height is adjusted by the lead screw and motor. After the impact position is confirmed, the electromagnet holding the impact head is powered off. The impact head falls freely to strike the test mattress and rebounds until it lands back on the mattress. Meanwhile, the laser‑ranging sensor records the distance of the impact head in real time, which can be converted into the rebound height via a calculation formula. Finally, the air cylinder pushes the electromagnet to attract the impact head and reset it to the impact height.
Enterprise Standard
| No. | Item | Specification |
|---|---|---|
| 1 | Impact head | 24 kg |
| 2 | Lifting speed | 16 mm/s |
| 3 | Specimen height | 30‑400 mm |
| 4 | Effective impact height | 0‑500 mm |
| 5 | Effective measuring range of laser sensor | 200‑600 mm |
| 6 | Servo motor | 400 W |
| 7 | Power supply | 1‑phase AC 220V, 50Hz, 6A |
| 8 | Overall dimension (L×W×H) | 2480×2280×2900 mm |
1. After the sample is fixed on the device, automatic testing can be performed by inputting sample parameters.
2. The device can display the rebound height of the impact head in real time.
3. The device is sturdy with low impact noise.
4. The device is equipped with multiple limit protections to prevent damage caused by mis‑operation.
5. Instrument fault protection:
Power‑off protection — Current test data is instantly saved upon power failure. When power is restored next time, previous test data can be viewed or testing can be resumed.
The Upper‑Hinge Flip‑Door Slamming Tester simula ...
The electric folding mechanism testing machine for ...
The automatic comprehensive mattress tester is sui ...
The fabric dynamic fatigue testing machine simula ...
Contact Us
contact usGetintouchwithus
TST
Telephone